Dr. Zabdiel Brito Brito

Departamento de Electrónica, Sistemas e Informática
zabdiel@iteso.mx
Tel. 36693434 Ext. 3905

Doctor en Teoría de la Señal y Comunicaciones por la Universidad Politécnica de Catalunya, España y Maestro en Ingeniería Electrónica por el Instituto Politécnico Nacional (IPN). Fue miembro del departamento de Ingeniería en Comunicaciones y Electrónica del IPN de agosto del 2003 a agosto del 2011.

Desde el 2011, se desempeña como profesor del Departamento de Electrónica, Sistemas e Informática en el Instituto Tecnológico de Estudios Superiores de Occidente (ITESO). Del 2013 al 2019 y del 2016 al 2019, fue nombrado coordinador de la Maestría en Diseño Electrónico y coordinador de la Especialidad en Diseño de Sistemas en Chip, respectivamente. En 2019 hasta el 2021 fue coordinador del Doctorado en Ciencias de la Ingeniería. Actualmente (2021) el profesor se encuentra en licencia.

El doctor Brito es miembro del Institute of Electrical and Electronics Engineers (IEEE), actualmente es el secretario de la Sección Guadalajara del IEEE. Desde el 2011, participa en el Grupo de Investigación en Ingeniería Asistida por Computadora de Circuitos y Sistemas (CAECAS).

Campo de especialidad
Diseño y optimización de circuitos y dispositivos de interconexión de alta velocidad, Sistemas reconfigurables de microondas y de RF.


Publicaciones recientes
Artículos de congreso
J. E. Rayas-Sánchez, and Z. Brito-Brito, "Applications of Broyden-based Input Space Mapping to Modeling and Design Optimization in High-Tech Companies in Mexico," in European Microwave Conf. (EuMC-2019), Paris, Francs, Oct. 2019, pp. 1-3.

Rosa J. Sanchez-Mesa, Diego Cortes-Hernandez, Jose E. Rayas-Sanchez, Zabdiel Brito-Brito, Lizbeth de la Mora-Hernández, "EM Parametric Study of Length Matching Elements Exploiting an ANSYS HFSS Matlab-Python Driver" in Proceedings of IEEE MTT-S Latin America Microwave Conference (LAMC-2018), Arequipa, Peru, Dec. 2018, 3pp.

Rosa J. Sanchez-Mesa, Diego Cortes-Hernandez, Benjamín Gálvez-Sahagún, Jose E. Rayas-Sanchez, Zabdiel Brito-Brito, "A Novel High-Performance Length Matching Element for High-Speed Interconnect Differential Channels" in Proceedings of IEEE MTT-S Latin America Microwave Conference (LAMC-2018), Arequipa, Peru, Dec. 2018, 3pp.

J. E. Rayas-Sánchez, F. E. Rangel-Patiño, A. Viveros-Wacher, J. L. Chávez-Hurtado, J. R. del-Rey, F. Leal-Romo, and Z. Brito-Brito, "Industry-oriented research projects on computer-aided design of high-frequency circuits and systems at ITESO Mexico," in European Microwave Conf. (EuMC-2018), Madrid, Spain, Sep. 2018, pp. 588-591.

J. E. Rayas-Sánchez and Z. Brito-Brito, "Academic and industrial research activities on RF and microwaves in Latin America: an overview," in European Microwave Conf. (EuMC-2017), Nuremberg, Germany, Oct. 2017, pp. 536-539.

 J. R. del-Rey, Z. Brito-Brito, J. E. Rayas-Sánchez, and N. Izquierdo, "Temperature effects in automotive-grade high speed interconnects," in IEEE MTT-S Latin America Microwave Conf. (LAMC-2016), Puerto Vallarta, Mexico, Dec. 2016, pp. 1-4.

J. L. Chávez-Hurtado, J. E. Rayas-Sánchez, and Z. Brito-Brito, "Multiphysics polynomial-based surrogate modeling of microwave structures in frequency domain," in IEEE MTT-S Latin America Microwave Conf. (LAMC-2016), Puerto Vallarta, Mexico, Dec. 2016, pp. 1-3.

A. E. Moreno-Mojica and Z. Brito-Brito, "Modeling of single-ended interconnects using surrogate model and design of experiments techniques," in Proceedings of IEEE International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE 2016),    Mexico City, Mexico, Sep. 2016, pp. 1-5.

J. E. Rayas-Sánchez, J. L. Chávez-Hurtado, and Z. Brito-Brito, "Enhanced formulation for polynomial-based surrogate modeling of microwave structures in frequency domain," in IEEE MTT-S Int. Conf. Num. EM Mutiphysics Modeling Opt. RF, Microw., Terahertz App. (NEMO-2015), Ottawa, Canada, Aug. 2015, pp. 1-3.

Z. Brito-Brito, J. E. Rayas-Sánchez, and J. L. Chávez-Hurtado, "Enhanced procedure to setup the simulation bounding box and the meshing scheme of a 3D finite element EM simulator for planar microwave structures," in IEEE MTT-S Int. Microwave Symp. Dig., Phoenix, AZ, May 2015, pp. 1-3.

J. R. del-Rey, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Impedance matching analysis and EMC validation of a low-cost PCB differential interconnect," in IEEE Latin American Test Symp. (LATS-2015), Puerto Vallarta, Mexico, Mar. 2015, pp. 1-5.

J. L. Chávez-Hurtado, J. E. Rayas-Sánchez, and Z. Brito-Brito, "Reliable full-wave EM simulation of a single-layer SIW interconnect with transitions to microstrip lines," in COMSOL Conf., Boston, MA, Oct. 2014, pp. 1-5.

J. E. Rayas-Sánchez and Z. Brito-Brito, "Research activities on computer-aided modeling, design and optimization of RF and microwave circuits at ITESO Mexico" in IEEE MTT-S Int. Microwave Symp. Dig., Tampa, FL, Jun. 2014, pp. 1-3.

Z. Brito-Brito, J. E. Rayas-Sánchez, J. C. Cervantes-González, and C. A. López, "Impact of 3D EM model configuration on the direct optimization of microstrip structures," in COMSOL Conf., Boston, MA, Oct. 2013, pp. 1-5.

J. C. Cervantes-González, C. A. López, J. E. Rayas-Sánchez, Z. Brito-Brito, and G. Hernández-Sosa, "Return-loss minimization of package interconnects through input space mapping using FEM-based models," in Proc. SBMO/IEEE MTT-S Int. Microwave Optoelectronics Conf. (IMOC-2013), Rio de Janeiro, Brazil, Aug. 2013, pp. 1-4.

Z. Brito-Brito, I. Llamas-Garro, L. Pradell, F. Giacomozzi, and S. Colpo, "Frequency and bandwidth control of switchable microstrip bandpass filter using MEMS technologies," in Proceedings of International Symposium on RF-MEMS and RF-Microsystems (MEMSWAVE), Potsdam, Germany, July 2013, pp. 1-4.

J. E. Rayas-Sánchez, Z. Brito-Brito, J. C. Cervantes-González, and C. A. López, "Systematic configuration of coarsely discretized 3D EM solvers for reliable and fast simulation of high-frequency planar structures," in IEEE Latin American Symp. Circuits and Systems Dig. (LASCAS 2012), Cuzco, Peru, Feb. 2013, pp. 1-4.

J. E. Rayas-Sánchez, J. Aguilar-Torrentera, Z. Brito-Brito, J. C. Cervantes-González, and C. A. López, "EM simulation of a low-pass filter based on a microstrip defected ground structure," in COMSOL Conf., Boston, MA, Oct. 2012, pp. 1-6.

Z. Brito-Brito, I. Llamas-Garro, J. Perruisseau-Carrier, L. Pradell, F. Giacomozzi, and S. Colpo, "filtro paso-banda con control preciso de frecuencia central y ancho de banda usando interruptores RF MEMS", XXVII Spanish National URSI Symposium, Elche, Spain, Sep. 2012, pp. 1-4.

Z. Brito-Brito, I. Llamas-Garro, and J. C. Bohórquez-Reyes, "Recent advances in reconfigurable microwave filters", in Proc. of SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference, Natal, Brazil, Oct.-Nov. 2011, pp. 338-346.

X. Artiga, J. Perruisseau-Carrier, P. Pardo-Carrera, I. Llamas-Garro, and Z. Brito-Brito, "Design of Vivaldi antennas with embedded reconfigurable stopband filter," in Proc. of European Conference on Antennas and Propagation 2011, Rome, Italy, April 2011, pp. 2425-2429.

Y-H Jang, I. Llamas-Garro, Z. Brito-Brito, Y-K Kim, J-M Kim, "Micromachined Suspended Band-stop Resonator for Frequency Tuning," in Proc. of Progress in Electromagnetics Research Symposium, Marrakesh, MOROCCO, Mar. 2011.

Z. Brito-Brito, I. Llamas-Garro, G. Navarro-Muñoz, J. Perruisseau-Carrier, and L. Pradell, "Diplexor reconfigurable para estándares de transmisión y recepción WiFi-UMTS," in XXV Spanish National URSI Symposium, Bilbao, Spain, Sep. 2010, pp. 1-4.

Y-H Jang, I. Llamas-Garro, Z. Brito-Brito, J-M Kim, and Y-K Kim, "RF MEMS suspended band-stop resonator for frequency and bandwidth tuning," in 12th Korean Conf. on Micro Electro Mechanical Systems, Busan, Korea, April 2010.

Artículos de revista
A. Viveros-Wacher, J. E. Rayas-Sánchez, and Z. Brito-Brito, "Analog gross fault identification in RF circuits using neural models and constrained parameter extraction". IEEE Trans. Microwave Theory Techn., vol. 67, no. 3, pp. 2143-2150, June 2019.

J. E. Rayas-Sánchez, J. L. Chavez-Hurtado, and Z. Brito-Brito, "Design optimization of full-wave EM models by low-order low-dimension polynomial surrogate functionals," Int. J. Numerical Modelling: Electron. Networks, Dev. Fields., vol. 30, no. 3-4, e2094, May-Aug. 2017.

J. C. Cervantes-González, J. E. Rayas-Sánchez, C. A. López, J. R. Camacho-Pérez, Z. Brito-Brito, and J. L. Chavez-Hurtado, "Space mapping optimization of handset antennas considering EM effects of mobile phone components and human body," Int. J. RF and Microwave CAE, vol. 26, no. 2, pp. 121-128, Feb. 2016.

I. Llamas-Garro, Z. Brito-Brito, L. Pradell, F. Giacomozzi, and S. Colpo, "Discretely tuned RF-MEMS bandstop filter with wide tuning range and uniform high rejection," Electronics Letters, vol. 48, no. 17, pp. 1065-1067, Aug. 2012.

 Z. Brito-Brito, I. Llamas-Garro, G. Navarro-Muñoz, J. Perruisseau-Carrier, L. Pradell, F. Giacomozzi, and S. Colpo, "Precise frequency and bandwidth control of switchable microstrip bandpass filters using diode and microelectro-mechanical system technologies," IET Microwaves, Antennas & Propagation, vol. 6, no. 6, pp 713-719, April 2012.

 J. Benet-Freissinier, Z. Brito-Brito, I. Llamas-Garro, and R. M. Fernández-Cantí, "Sintonización automática de filtros de microondas mediante motores a pasos," IEEE Buran, vol. 26, no. 18, pp. 33-39, Sep. 2011.

X. Artiga, J. Perruisseau-Carrier, P. Pardo-Carrera, I. Llamas-Garro, and Z. Brito-Brito, "Halved Vivaldi antenna with reconfigurable band rejection," IEEE Antennas and Wireless Propagation Letters, vol. 10, no. 1, pp. 56-58, March 2011.

 Z. Brito-Brito, I. Llamas-Garro, G. Navarro-Muñoz, J. Perruisseau-Carrier, and L. Pradell, "Switchable bandpass filter for WiFi-UMTS reception standards," Electronics Letters, vol. 46, no. 13, pp. 930-931, June 2010.

C. Musoll-Anguiano, I. Llamas-Garro, Z. Brito-Brito, L. Pradell, and A. Corona-Chavez, "Fully adaptable bandstop filter using varactor diodes," Microwave and Optical Technology Letters, Wiley, vol. 52, no. 3, pp. 554 -558, March 2010.

 Z. Brito Brito, C. Musoll, I. Llamas, L. Pradell, and A. Corona, "Fully adaptable band-stop filter using varactor diodes," Microwave and Optical Technology Letters, vol. 52, no. 3, pp 554-558, Jan. 2010. 

Otros 
R. J. Sánchez-Mesa, J. E. Rayas-Sánchez, and Z. Brito-Brito, "Comparison between full-wave EM simulations and experimental measurements for a microstrip transmission line," Internal Report PhDEngScITESO-17-02-R (CAECAS-17-02-R), ITESO, Tlaquepaque, Mexico, Feb. 2017.

J. R. del-Rey, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Temperature effects in automotive-grade high speed interconnects," Internal Report PhDEngScITESO-16-31-R (CAECAS-16-15-R), ITESO, Tlaquepaque, Mexico, Dec. 2016.

J. L. Chávez-Hurtado, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Multiphysics modeling of microwave structures in frequency domain using PSM," Internal Report PhDEngScITESO-16-21-R (CAECAS-16-12-R), ITESO, Tlaquepaque, Mexico, Dec. 2016.

J. L. Chávez-Hurtado, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Multiphysical characterization of microwave structures in frequency domain," Internal Report PhDEngScITESO-16-13-R (CAECAS-16-10-R), ITESO, Tlaquepaque, Mexico, Nov. 2016.

J. R. del-Rey, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Modeling of a low-cost PCB differential interconnect using several commercially available simulators," Internal Report PhDEngScITESO-15-19-R (CAECAS-15-17-R), ITESO, Tlaquepaque, Mexico, Dec. 2015.

J. R. del-Rey, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Precision awareness in measurements of PCB high speed interconnects," Internal Report PhDEngScITESO-14-20-R (CAECAS-14-13-R), ITESO, Tlaquepaque, Mexico, Dec. 2014.

J. R. del-Rey, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Impedance matching optimization of a low-cost PCB differential interconnect," Internal Report PhDEngScITESO-14-18-R (CAECAS-14-12-R), ITESO, Tlaquepaque, Mexico, Dec. 2014.

J. C. Cervantes-González, J. E. Rayas-Sánchez, C. A. López, J. L. Chávez-Hurtado, T. A. Gómez-Hernández, and Z. Brito-Brito, "EM simulations of a T-slot PIFA considering coupling effects to handset components and human head," Internal Report CAECAS-14-11-R, ITESO, Tlaquepaque, Mexico, Dec. 2014. 

J. R. del-Rey, Z. Brito-Brito, and J. E. Rayas-Sánchez, "A low cost printed circuit board impedance matching analysis for the internet of things," Internal Report PhDEngScITESO-14-04-R (CAECAS-14-05-R), ITESO, Tlaquepaque, Mexico, Aug. 2014. 

J. L. Chávez-Hurtado, J. E. Rayas-Sánchez, and Z. Brito-Brito, "COMSOL configuration for the EM simulation of a single-layer SIW interconnect with transitions to microstrip lines," Internal Report PhDEngScITESO-14-07-R (CAECAS-14-07-R), ITESO, Tlaquepaque, Mexico, Oct. 2014.       

Z. Brito-Brito, J. L. Chávez-Hurtado, and J. E. Rayas-Sánchez, "EM model for a fifth order Chebyshev bandstop microstrip filter with L-shaped resonators using ADS momentum," Internal Report CAECAS-14-01-R, ITESO, Tlaquepaque, Mexico, Mar. 2014.         

G. Gómez-del-Toro, T. A. Gómez-Hernández, J. E. Rayas-Sánchez, and Z. Brito-Brito, "Initial study of a microstrip high-speed interconnect using Sonnet and Aplac," Internal Report CAECAS-13-09-R, ITESO, Tlaquepaque, Mexico, Dec. 2013. 

J. L. Chávez-Hurtado, Z. Brito-Brito, and J. E. Rayas-Sánchez, "Coarse and fine models for a fifth order Chebyshev bandstop microstrip filter with L-shaped resonators using COMSOL and Sonnet," Internal Report PhDEngScITESO-13-01-R (CAECAS-13-08-R), ITESO, Tlaquepaque, Mexico, Dec. 2013. 

T. A. Gómez-Hernández, R. Bustos-Ramírez, J. E. Rayas-Sánchez, Z. Brito-Brito, J. C. Cervantes-González, and C. A. López, "Configuration of coaxial ports in COMSOL for reliable electromagnetic simulations," Internal Report CAECAS-13-07-R, ITESO, Tlaquepaque, Mexico, Dec. 2013.  

R. Bustos-Ramírez, T. A. Gómez-Hernández, J. C. Cervantes-González, Z. Brito-Brito, J. E. Rayas-Sánchez and C. A. López, "Alternative EM simulation of a package via-stripline-via interconnect using COMSOL," Internal Report CAECAS-13-05-R, ITESO, Tlaquepaque, Mexico, May 2013. 

Z. Brito-Brito and J. E. Rayas-Sánchez, "Losses test for geometrically symmetric and asymmetric structures simulated in COMSOL," Internal Report CAECAS-13-03-R, ITESO, Tlaquepaque, Mexico, Feb. 2013. 

J. E. Rayas-Sánchez, Z. Brito-Brito, J. C. Cervantes-González, and C. A. López, "Systematic configuration of coarsely discretized 3D EM solvers for reliable and fast simulation of high-frequency planar structures," in IEEE Latin American Symp. Circuits and Systems Dig. (LASCAS 2012), Cuzco, Peru, Feb. 2013, pp. 1-4. (P-ISBN: 978-1-4673-4897-3; DOI: 10.1109/LASCAS.2013.6519093)

J. E. Rayas-Sánchez and Z. Brito-Brito, "Broyden-based input space mapping optimization of a microstrip low-pass filter implemented in COMSOL," Internal Report CAECAS-12-21-R, ITESO, Tlaquepaque, Mexico, Oct. 2012. 

J. E. Rayas-Sánchez, J. C. Cervantes-González, C. A. López, Z. Brito-Brito, and J. Aguilar-Torrentera,  "Developing coarse and fine EM COMSOL models of a microstrip low-pass filter for space mapping optimization," Internal Report CAECAS-12-19-R, ITESO, Tlaquepaque, Mexico, Sep. 2012. 

J. E. Rayas-Sánchez and Z. Brito-Brito, "Selecting suitable optimization methods for direct EM optimization of low-fidelity models in COMSOL," Internal Report CAECAS-12-16-R, ITESO, Tlaquepaque, Mexico, Aug. 2012. 

Z. Brito-Brito, J. C. Cervantes-González, J. E. Rayas-Sánchez, and C. A. López, "EM-thermo-mechanical simulation of a microstrip bandstop notch filter using COMSOL Multiphysics," Internal Report CAECAS-12-13-R, ITESO, Tlaquepaque, Mexico, Jun. 2012. 

J. C. Cervantes-González, Z. Brito-Brito, C. A. López, and J. E. Rayas-Sánchez, "EM-thermo-mechanical simulation of a microstrip bandpass filter using COMSOL Multiphysics," Internal Report CAECAS-12-12-R, ITESO, Tlaquepaque, Mexico, Jun. 2012. 

J. E. Rayas-Sánchez and Z. Brito-Brito, "Optimal configuration of lumped ports in COMSOL for non-resonant planar structures," Internal Report CAECAS-12-11-R, ITESO, Tlaquepaque, Mexico, Jun. 2012. 

Z. Brito-Brito and J. E. Rayas-Sánchez, "EM simulation of a lossless microstrip bandpass filter using COMSOL with lumped ports," Internal Report CAECAS-12-07-R, ITESO, Tlaquepaque, Mexico, May 2012. 

Z. Brito-Brito and J. E. Rayas-Sánchez, "COMSOL simulation of an ideal stripline using lumped ports and thick metals," Internal Report CAECAS-12-02-R, ITESO, Tlaquepaque, Mexico, Jan. 2012. 

N. Vargas-Chávez, J. E. Rayas-Sánchez, C. A. López, Z. Brito-Brito, and J. Aguilar-Torrentera, "Estudio paramétrico de la configuración térmica de una línea microcinta en COMSOL," Internal Report CAECAS-11-25-R, ITESO, Tlaquepaque, Mexico, Dec. 2011. 

J. Aguilar-Torrentera, J. E. Rayas-Sánchez, and Z. Brito-Brito, "COMSOL validation of unilateral thermal-EM simulation of a microstrip exposed to independent heat sources," Internal Report CAECAS-11-24-R, ITESO, Tlaquepaque, Mexico, Dec. 2011. 

Z. Brito-Brito and J. E. Rayas-Sánchez, "COMSOL simulation of an ideal stripline using lumped ports and symmetry," Internal Report CAECAS-11-22-R, ITESO, Tlaquepaque, Mexico, Dec. 2011. 

N. Vargas-Chávez, J. E. Rayas-Sánchez, and Z. Brito-Brito, "Simulación en COMSOL de una línea microcinta ideal sin pérdidas con puertos concentrados y comparación con otros simuladores," Internal Report CAECAS-11-20-R, ITESO, Tlaquepaque, Mexico, Nov. 2011. 

J. Aguilar-Torrentera, J. E. Rayas-Sánchez and Z. Brito-Brito, "Electromagnetic analysis of a stripline exposed to an external heat source using COMSOL multiphysics simulation," Internal Report CAECAS-11-18-R, ITESO, Tlaquepaque, Mexico, Oct. 2011.   

Patentes

J. R. del-Rey and Z. Brito-Brito (ITESO), "Interconexión metálica flexible para transferencia de señales eléctricas de alta frecuencia entre dos circuitos impresos," Mexican Patent Application MX/A/2018/003154 (IMPI), March 14, 2018.

J. R. del-Rey and Z. Brito-Brito (ITESO), "Interconexión metálica flexible para transferencia de señales eléctricas de alta frecuencia entre dos circuitos impresos," International Patent Application PCT RO/MX PCT/MX2018/000024 (PCT), March 15, 2018.

Identificador ORCiD